Apply nail polish to your nail and let it completely dry. You can use a fast dry top coat over nail polish or bare nails to create a flat surface which can help product stick better. Make sure nail is dry and free of oily residues before applying product.◎◎Peel product from backing sheet and lightly push to the nail paying attention near skin and the tips of nails. You can cut the product to help form to the tip, sides and curvature of the nail. If small pieces remain inside a stencil, try peeling faster from different directions or flip and stick/peel the stencil to the back of the sheet to pull out the small pieces.◎◎Apply fresh or thinned nail polish across the product. Shimmer or metallic nail polishes work better than cremes. You can apply nail polish with a sponge, like ombre design, to prevent bleeding for cleaner lines. If needed, remove extra nail polish from your skin by using a flat brush dipped in nail polish remover.◎◎Remove product immediately after applying nail polish using your fingers, tweezers or nippers while the polish is still wet. For better results, pull the tape following its edges and stencils following the pattern.◎◎Wait until your design has completely dried and apply fresh or thinned top coat. To prevent smearing, apply using the least amount of strokes and hold your brush parallel to your nail. If you want to leave stickers on your nails, seal them with 1-2 thick layers of top coat.◎
Apply nail polish to your nail and let it completely dry. You can use a fast dry top coat over nail polish or bare nails to create a flat surface which can help product stick better. Make sure nail is dry and free of oily residues before applying product.
Peel product from backing sheet and lightly push to the nail paying attention near skin and the tips of nails. You can cut the product to help form to the tip, sides and curvature of the nail. If small pieces remain inside a stencil, try peeling faster from different directions or flip and stick/peel the stencil to the back of the sheet to pull out the small pieces.
Apply fresh or thinned nail polish across the product. Shimmer or metallic nail polishes work better than cremes. You can apply nail polish with a sponge, like ombre design, to prevent bleeding for cleaner lines. If needed, remove extra nail polish from your skin by using a flat brush dipped in nail polish remover.
Remove product immediately after applying nail polish using your fingers, tweezers or nippers while the polish is still wet. For better results, pull the tape following its edges and stencils following the pattern.
Wait until your design has completely dried and apply fresh or thinned top coat. To prevent smearing, apply using the least amount of strokes and hold your brush parallel to your nail. If you want to leave stickers on your nails, seal them with 1-2 thick layers of top coat.
Apply nail polish to your nail and let it completely dry. You can use a fast dry top coat over nail polish or bare nails to create a flat surface which can help product stick better. Make sure nail is dry and free of oily residues before applying product.◎◎Peel product from backing sheet and lightly push to the nail paying attention near skin and the tips of nails. You can cut the product to help form to the tip, sides and curvature of the nail. If small pieces remain inside a stencil, try peeling faster from different directions or flip and stick/peel the stencil to the back of the sheet to pull out the small pieces.◎◎Apply fresh or thinned nail polish across the product. Shimmer or metallic nail polishes work better than cremes. You can apply nail polish with a sponge, like ombre design, to prevent bleeding for cleaner lines. If needed, remove extra nail polish from your skin by using a flat brush dipped in nail polish remover.◎◎Remove product immediately after applying nail polish using your fingers, tweezers or nippers while the polish is still wet. For better results, pull the tape following its edges and stencils following the pattern.◎◎Wait until your design has completely dried and apply fresh or thinned top coat. To prevent smearing, apply using the least amount of strokes and hold your brush parallel to your nail. If you want to leave stickers on your nails, seal them with 1-2 thick layers of top coat.◎
Apply nail polish to your nail and let it completely dry. You can use a fast dry top coat over nail polish or bare nails to create a flat surface which can help product stick better. Make sure nail is dry and free of oily residues before applying product.
Peel product from backing sheet and lightly push to the nail paying attention near skin and the tips of nails. You can cut the product to help form to the tip, sides and curvature of the nail. If small pieces remain inside a stencil, try peeling faster from different directions or flip and stick/peel the stencil to the back of the sheet to pull out the small pieces.
Apply fresh or thinned nail polish across the product. Shimmer or metallic nail polishes work better than cremes. You can apply nail polish with a sponge, like ombre design, to prevent bleeding for cleaner lines. If needed, remove extra nail polish from your skin by using a flat brush dipped in nail polish remover.
Remove product immediately after applying nail polish using your fingers, tweezers or nippers while the polish is still wet. For better results, pull the tape following its edges and stencils following the pattern.
Wait until your design has completely dried and apply fresh or thinned top coat. To prevent smearing, apply using the least amount of strokes and hold your brush parallel to your nail. If you want to leave stickers on your nails, seal them with 1-2 thick layers of top coat.
Apply nail polish to your nail and let it completely dry. You can use a fast dry top coat over nail polish or bare nails to create a flat surface which can help product stick better. Make sure nail is dry and free of oily residues before applying product.◎◎Peel product from backing sheet and lightly push to the nail paying attention near skin and the tips of nails. You can cut the product to help form to the tip, sides and curvature of the nail. If small pieces remain inside a stencil, try peeling faster from different directions or flip and stick/peel the stencil to the back of the sheet to pull out the small pieces.◎◎Apply fresh or thinned nail polish across the product. Shimmer or metallic nail polishes work better than cremes. You can apply nail polish with a sponge, like ombre design, to prevent bleeding for cleaner lines. If needed, remove extra nail polish from your skin by using a flat brush dipped in nail polish remover.◎◎Remove product immediately after applying nail polish using your fingers, tweezers or nippers while the polish is still wet. For better results, pull the tape following its edges and stencils following the pattern.◎◎Wait until your design has completely dried and apply fresh or thinned top coat. To prevent smearing, apply using the least amount of strokes and hold your brush parallel to your nail. If you want to leave stickers on your nails, seal them with 1-2 thick layers of top coat.◎
Apply nail polish to your nail and let it completely dry. You can use a fast dry top coat over nail polish or bare nails to create a flat surface which can help product stick better. Make sure nail is dry and free of oily residues before applying product.
Peel product from backing sheet and lightly push to the nail paying attention near skin and the tips of nails. You can cut the product to help form to the tip, sides and curvature of the nail. If small pieces remain inside a stencil, try peeling faster from different directions or flip and stick/peel the stencil to the back of the sheet to pull out the small pieces.
Apply fresh or thinned nail polish across the product. Shimmer or metallic nail polishes work better than cremes. You can apply nail polish with a sponge, like ombre design, to prevent bleeding for cleaner lines. If needed, remove extra nail polish from your skin by using a flat brush dipped in nail polish remover.
Remove product immediately after applying nail polish using your fingers, tweezers or nippers while the polish is still wet. For better results, pull the tape following its edges and stencils following the pattern.
Wait until your design has completely dried and apply fresh or thinned top coat. To prevent smearing, apply using the least amount of strokes and hold your brush parallel to your nail. If you want to leave stickers on your nails, seal them with 1-2 thick layers of top coat.
Apply nail polish to your nail and let it completely dry. You can use a fast dry top coat over nail polish or bare nails to create a flat surface which can help product stick better. Make sure nail is dry and free of oily residues before applying product.◎◎Peel product from backing sheet and lightly push to the nail paying attention near skin and the tips of nails. You can cut the product to help form to the tip, sides and curvature of the nail. If small pieces remain inside a stencil, try peeling faster from different directions or flip and stick/peel the stencil to the back of the sheet to pull out the small pieces.◎◎Apply fresh or thinned nail polish across the product. Shimmer or metallic nail polishes work better than cremes. You can apply nail polish with a sponge, like ombre design, to prevent bleeding for cleaner lines. If needed, remove extra nail polish from your skin by using a flat brush dipped in nail polish remover.◎◎Remove product immediately after applying nail polish using your fingers, tweezers or nippers while the polish is still wet. For better results, pull the tape following its edges and stencils following the pattern.◎◎Wait until your design has completely dried and apply fresh or thinned top coat. To prevent smearing, apply using the least amount of strokes and hold your brush parallel to your nail. If you want to leave stickers on your nails, seal them with 1-2 thick layers of top coat.
Apply nail polish to your nail and let it completely dry. You can use a fast dry top coat over nail polish or bare nails to create a flat surface which can help product stick better. Make sure nail is dry and free of oily residues before applying product.
Peel product from backing sheet and lightly push to the nail paying attention near skin and the tips of nails. You can cut the product to help form to the tip, sides and curvature of the nail. If small pieces remain inside a stencil, try peeling faster from different directions or flip and stick/peel the stencil to the back of the sheet to pull out the small pieces.
Apply fresh or thinned nail polish across the product. Shimmer or metallic nail polishes work better than cremes. You can apply nail polish with a sponge, like ombre design, to prevent bleeding for cleaner lines. If needed, remove extra nail polish from your skin by using a flat brush dipped in nail polish remover.
Remove product immediately after applying nail polish using your fingers, tweezers or nippers while the polish is still wet. For better results, pull the tape following its edges and stencils following the pattern.
Wait until your design has completely dried and apply fresh or thinned top coat. To prevent smearing, apply using the least amount of strokes and hold your brush parallel to your nail. If you want to leave stickers on your nails, seal them with 1-2 thick layers of top coat.
Press the buttons on the top of the container lightly to bring out the proper amount, and apply it lightly to the entire face, including the forehead, T-zone, both cheeks and chin.
Press the buttons on the top of the container lightly to bring out the proper amount, and apply it lightly to the entire face, including the forehead, T-zone, both cheeks and chin.
Press the buttons on the top of the container lightly to bring out the proper amount, and apply it lightly to the entire face, including the forehead, T-zone, both cheeks and chin.
Luminous-capsulated foundation that makes the skin look spotless and clean as it touches.
建議的使用方式
Press the buttons on the top of the container lightly to bring out the proper amount, and apply it lightly to the entire face, including the forehead, T-zone, both cheeks and chin.
Use when cleansing face during morning and evening. Use wet hands to form bubbles and rub entire face gently. Wash offer with lukewarm water thoroughly.
Use when cleansing face during morning and evening. Use wet hands to form bubbles and rub entire face gently. Wash offer with lukewarm water thoroughly.
On The Rocks 是一款帶領潮流的 14 色冷調眼影盤。本眼影盤產品集合了大地色等自然色調和奶油金黃色、深黃色等較為濃烈的配色。產品內的色調可以與高水準的色素沉著混合。這使每個人都可以創建柔和自然的外觀，一直到醒目大膽的眼睛。本眼影盤產品由帶有金屬閃片的眼影和奶油質地的啞光眼影組成。本 On The Rocks 眼影盤產品由優質材料製成，其金屬閃片眼影和啞光眼影一樣質地絲滑，顯色度高。
Dusk Till Dawn 是一款紫調 14 色眼影盤產品。本眼影盤產品呈現了阿拉丁魔法洞穴的迷人配色。Dawn Till Dusk 濃墨重彩的眼影配色讓整個眼影盤充滿活力。本 Dawn Till Dusk 眼影盤產品有 7 格啞光眼影，除了百搭的裸色和沙色，還有或明或暗的紅調和紫調眼影。其餘 7 格眼影加入了閃片，配合啞光眼影使用可打造出迷人眼妝。
Cut the remaining portion of the strip by a nail file.
To Remove:
Just peel off strips from cuticle line gently.
Tips:
Before attaching, trim the cuticle line and surface of nails by nail file or cuticle grinder. Make sure to clean on your nails without any moisture or oil.
After the whole process, it is recommended to use a top coat or top gel for a long lasting and glossy effect.
Cut the remaining portion of the strip by a nail file.
To Remove:
Just peel off strips from cuticle line gently.
Tips:
Before attaching, trim the cuticle line and surface of nails by nail file or cuticle grinder. Make sure to clean on your nails without any moisture or oil.
After the whole process, it is recommended to use a top coat or top gel for a long lasting and glossy effect.
Cut the remaining portion of the strip by a nail file.
To Remove:
Just peel off strips from cuticle line gently.
Tips:
Before attaching, trim the cuticle line and surface of nails by nail file or cuticle grinder. Make sure to clean on your nails without any moisture or oil.
After the whole process, it is recommended to use a top coat or top gel for a long lasting and glossy effect.
Cut the remaining portion of the strip by a nail file.
To Remove:
Just peel off strips from cuticle line gently.
Tips:
Before attaching, trim the cuticle line and surface of nails by nail file or cuticle grinder. Make sure to clean on your nails without any moisture or oil.
After the whole process, it is recommended to use a top coat or top gel for a long lasting and glossy effect.
Cut the remaining portion of the strip by a nail file.
To Remove:
Just peel off strips from cuticle line gently.
Tips:
Before attaching, trim the cuticle line and surface of nails by nail file or cuticle grinder. Make sure to clean on your nails without any moisture or oil.
After the whole process, it is recommended to use a top coat or top gel for a long lasting and glossy effect.
Cut the remaining portion of the strip by a nail file.
To Remove:
Just peel off strips from cuticle line gently.
Tips:
Before attaching, trim the cuticle line and surface of nails by nail file or cuticle grinder. Make sure to clean on your nails without any moisture or oil.
After the whole process, it is recommended to use a top coat or top gel for a long lasting and glossy effect.
Cut the remaining portion of the strip by a nail file.
To Remove:
Just peel off strips from cuticle line gently.
Tips:
Before attaching, trim the cuticle line and surface of nails by nail file or cuticle grinder. Make sure to clean on your nails without any moisture or oil.
After the whole process, it is recommended to use a top coat or top gel for a long lasting and glossy effect.
Cut the remaining portion of the strip by a nail file.
To Remove:
Just peel off strips from cuticle line gently.
Tips:
Before attaching, trim the cuticle line and surface of nails by nail file or cuticle grinder. Make sure to clean on your nails without any moisture or oil.
After the whole process, it is recommended to use a top coat or top gel for a long lasting and glossy effect.
Cut the remaining portion of the strip by a nail file.
To Remove:
Just peel off strips from cuticle line gently.
Tips:
Before attaching, trim the cuticle line and surface of nails by nail file or cuticle grinder. Make sure to clean on your nails without any moisture or oil.
After the whole process, it is recommended to use a top coat or top gel for a long lasting and glossy effect.
Cut the remaining portion of the strip by a nail file.
To Remove:
Just peel off strips from cuticle line gently.
Tips:
Before attaching, trim the cuticle line and surface of nails by nail file or cuticle grinder. Make sure to clean on your nails without any moisture or oil.
After the whole process, it is recommended to use a top coat or top gel for a long lasting and glossy effect.
Cut the remaining portion of the strip by a nail file.
To Remove:
Just peel off strips from cuticle line gently.
Tips:
Before attaching, trim the cuticle line and surface of nails by nail file or cuticle grinder. Make sure to clean on your nails without any moisture or oil.
After the whole process, it is recommended to use a top coat or top gel for a long lasting and glossy effect.
Cut the remaining portion of the strip by a nail file.
To Remove:
Just peel off strips from cuticle line gently.
Tips:
Before attaching, trim the cuticle line and surface of nails by nail file or cuticle grinder. Make sure to clean on your nails without any moisture or oil.
After the whole process, it is recommended to use a top coat or top gel for a long lasting and glossy effect.
Cut the remaining portion of the strip by a nail file.
To Remove:
Just peel off strips from cuticle line gently.
Tips:
Before attaching, trim the cuticle line and surface of nails by nail file or cuticle grinder. Make sure to clean on your nails without any moisture or oil.
After the whole process, it is recommended to use a top coat or top gel for a long lasting and glossy effect.
Cut the remaining portion of the strip by a nail file.
To Remove:
Just peel off strips from cuticle line gently.
Tips:
Before attaching, trim the cuticle line and surface of nails by nail file or cuticle grinder. Make sure to clean on your nails without any moisture or oil.
After the whole process, it is recommended to use a top coat or top gel for a long lasting and glossy effect.
留言列表
